MiniWare Drawings

View Drawings for an Existing Building in an Existing Project.
 
bullet For an Existing Building, User can View the Drawing by selecting the View Drawing option on the Left Hand side.
bullet Floor Plan Drawing Shows the Floor Plan of the Building in MiniWare DXF Viewer.
bullet Roof Framing Plan Shows the Roof Framing Plan of the Building in the MiniWare DXF Viewer.
bullet FSW Cross Section Shows the Front Side Wall Cross Section of Building in the MiniWare DXF Viewer.
bullet BSW Cross Section Shows the Back Side Wall Cross Section of Building in the MiniWare DXF Viewer.
bullet REW Cross Section Shows the Right End Wall Cross Section of Building in the MiniWare DXF Viewer.
bullet LEW Cross Section Shows the Left End Wall Cross Section of Building in the MiniWare DXF Viewer.
bullet User can also export the DXF drawings in AutoCAD as well as InteliCAD.

Following are few snapshots of the Drawings generated by MiniWare

MiniWare Floor Plan Drawing.
 

Roof Framing Plan Drawing which is generated by MiniWare using AutoCAD ARX Programming.
 

Floor Plan Drawing which is generated by MiniWare using IntelliCAD ARX Programming.
 

Front Side Wall Framing Back Side Wall Framing Drawing which is generated by MiniWare using IntelliCAD ARX Programming.
| Home | Project Manager | MiniWare Wizards | MiniWare Reports | Building Isometric | Report Customization |

| Graphical Layout | Export and Import | Project & Building Cost | MiniWare Help | MiniWare Log | MiniWare Database |

Contact Information:

Phone: (414) 294-4795
Fax: (414) 294-0403
Email: info@structuraldesignsoft.com
URL: www.structuraldesignsoft.com