|
|
|
|
|
|
Following is the description of the various toolbar buttons used in the Graphical Layout screen.
 |
The Save Button is used to save the Graphical Layout created by the user. |
 |
The Exit Button is used to Exit from the Graphical Layout after creating the Layout. |
 |
The Reset Layout button is used to Reset the Layout back to the Original Layout. |
 |
The Undo button is used to Undo the latest changes made by the user. |
 |
The Restore button is used to the Redo the changes made by using the undo button. |
 |
The Cut button is used to Remove the Stall from one location and Paste it to a different location using the Paste button. |
 |
The Copy button is used to Copy a Stall and Paste it to a different location. |
 |
The Paste button is used to Paste anything that is either Cut or Copied using the Cut or the Copy button. |
 |
The Clear button is used to Delete the stall selected by the user. |
 |
The Select All button is used to select all the Stalls on the screen at once. |
 |
The Duplicate button is used to create Duplicate stall of the stall selected by the user. |
 |
The Rotate button is used to Rotate the stall selected by the user by 90, 180 or 270 degrees. |
 |
The 90 Rotate button is used to Rotate the stall selected by the user by 90 degrees. |
 |
The 180 Rotate button is used to rotate the stall selected by the user by 180 degrees. |
 |
The 270 Rotate button is used to rotate the stall selected by the user by 270 degrees. |
 |
The Normal mode button is used to deselect the any of the Custom Layout button. |
 |
The Grid lines button is used to show Grid lines. |
 |
The Grid dots button is used to show Grid dots. |
 |
The Stall Size tip button is used to show/hide the stall sizes as the mouse is moved on the stalls. |
 |
The Isometric view button is used to see the Isometric view of the Building while creating the Building Layout. |
 |
The Stall Properties button is used to see the Properties of the selected Stall. |
 |
The Layout Properties button is used to see the Properties of the created Layout. |
 |
The Auto rotate button is used Automatically rotate the stall before placing it on the Grid. |
 |
The Small move value button is used to change the displacement value of the Stalls, when moved using Cntrl + Arrow keys. |
 |
The Help button is used to check out the Help available on the Graphical Layout Screen. |
|
|
|||
|
